Tài liệu Tutorial for Novices to Agilent’s Advanced Design System (ADS)

Tutorial for Novices to Agilent’s Advanced Design System (ADS)
by Dr. B.S. Virdee

Table of Contents
1. Create a NEW Project Directory . 4
2. Open a Schematic Window . 5
3. Get parts and Paste .5
4. Copy/Paste and Move a part 6
5. Calculate length and width of MLIN with Line Calculation Tool .7
6. Change Component Parameters .8
7. Add MTEE part, Change width of MTEE and Move Text of a part 9
8. Add Open Circuit Stub (MLOC) .10
9. Calculate the length of MLOC and Change Parameters of Open Circuit Stub
(MLOC) 11
10. Add Term, R and L . 12
11. Add S Parameter 13
12. Add MSUB 14
13. Saving and Simulation of the Circuit .15
14. Open a Data Display Window, and Rectangular Plot in the Data Display Window
16
15. Select S(1,1)/Plot Magnitude Parameter .17
16. Add Marker on S(1,1) graph 18
17. Tuning Parameters 19
18. Fine Tuning Parameters 20
19. Changing Impedance to Admittance .21
20. Tuning with Smith Chart 22
21. Matching with Admittance .23


​