Sách Electrochemical Machining (ECM)

The electrolyte must be injected in the gap at The electrolyte must be injected in the gap at
high speed (between 1500 to 3000 m/min). high speed (between 1500 to 3000 m/min).
The inlet pressure must be between 0.15­3 The inlet pressure must be between 0.15­3
MPa. MPa.
The electrolyte system must include a fairly The electrolyte system must include a fairly
strong pump. strong pump.
System also includes a filter, sludge removal System also includes a filter, sludge removal
system, and treatment units. system, and treatment units.
The electrolyte is stored in a tank. The electrolyte is stored in a tank.